Make sure you are running Mac OS version 10.4 or less

Click on the Apple Menu at the top left corner of the screen and select “About this Mac”

If necessary "Turn Airport On" as shown below

Enter your Wildcat Username and Password

If the steps above do not connect you to the wireless network, please reset your Wildcat password and wait several minutes before trying the new password. If you still fail to connect, please follow the instructions below or see the "Common Problems" section at the end.

Select "Open Internet Connect" from the AirPort menu

Select "New 802.1X Connection" from the File menu

Click on the 802.1X icon in the toolbar if it's not currently highlighted.
Then select "Edit Configurations..." from the Configuration pull-down menu

Next fill in the following information as shown in the picture below and click OK

Description:  Weber Secure
Network Port:  AirPort
User Name:  <Wildcat Username>
Password:  <Wildcat Password>
Wireless Network:  WSU Secure
Authentication:  PEAP

Click the "Connect" button as shown below

Accept the certificate by clicking "Show Certificate"

Change the certificate trust level to "Always Trust". Then click the "Continue" button.

COMMON PROBLEMS

If you still get the following error, please contact the IT Service Desk
at (801) 626-7777 for further assistance or help resetting your password.