Construction Management Technology
BACHELOR OF SCIENCE DEGREE (BS)
- » Program Prerequisite: Declare a Program of Study in CMT
-
- » Minor: Not required; Business minor is recommended.
-
- » Grade Requirements: A grade of "C" or better in all
CMT Program required courses and math, business and management courses is required (a grade of "C-" is not acceptable)
in addition to an overall GPA for all courses of 2.0 or higher. Also refer to the
general grade requirements for graduation under General
Requirements.
-
- » Credit Hour Requirements: A total of 126 credit hours is required
for graduation. A total of 40 upper division credit hours is required (courses
numbered 3000 and above).
-
- » Work Experience Requirements: A total of 800 hours of approved
work experience is also required for graduation. There are provisions to
recognize those with significant construction industry experience. Contact
Karen Doutre at Career Services/College of Applied Science & Technology;
Phone: 801-626-6877 (ksdoutre@weber.edu)
for possible internships.
-
Advisement
All Construction Management Technology students are encouraged to meet with a faculty
advisor at the beginning of their freshman and junior year for course and program advisement. Call the CMT
program secretary
at 801-626-7761 to schedule an appointment. (Also refer to the Department Advisor
Referral List.)
Admission Requirements
Declare your program of study. There are no
special admission or application requirements for this program.
General Education
Refer to General Requirements for
Bachelor of Science requirements. Consult with an academic advisor for specific
general education guidelines. The following courses required for the Construction
Management Technology BS degree will also fulfill general education requirements: COMM
HU1010/HU2110 (Humanities), MATH QL1080 (Quantitative Literacy), ECON
SS2010 (Social Science) and PHYS PS/SI2010, GEO PS1060 (Physical Sciences), and BTNY LS1403
(Life Sciences) . Computer
and Information Literacy as defined in this catalog is also required.
Course Requirements for BS Degree
Course requirements are subject to change. Check with program advisor for current
requirements.
Construction Management Technology Courses Required (61 credit hours)
- CMT 1100 Construction Management Orientation (1)
- CMT 1150 Construction Graphics (3)
- CMT 1210 Residential Construction Materials & Methods (3)
- CMT 1310 Commercial Construction Materials & Methods (3)
- CMT 1500 Computer Applications in Construction (3)
- CMT 2220 Construction Contracts & Specs (3)
- CMT SI2330 Concrete Technology (3)
- CMT 2340 Construction Surveying (2)
- CMT 2360 Building Codes & Inspection (2)
- CMT 2640 Architectural Estimating (2)
- CMT 2880 Internship (3)
- CMT 3115 Construction Cost Estimating (3)
- CMT 3130 Construction Planning & Scheduling (3)
- CMT 3210 Construction Management (3)
- CMT 3260 Mechanical & Electrical Systems (4)
- CMT 3350 Applied Structures (4)
- CMT 4120 Construction Accounting & Finance (3)
- CMT 4150 Construction Equipment & Methods (3)
- CMT 4350 Design of Construction Systems (2)
- CMT 4550 Construction Safety (2)
- CMT 4610/20 Senior Project (2/2)
- CMT 4890 Practicum (2)
Business Courses Required (21 credit hours)
- ACTG 2010 Survey of Accounting I (3)
- ECON SS2010 Principles of Microeconomics (3)
- BSAD 3200 Legal Environment of Business (3)
- MGMT 3010 Organizational Behavior & Management (3)
- Approved Business Electives from list below (9)
Approved Business Elective Courses
Select 9 hours from the following recommended courses (6 hours must be
upper level):
- ECON SS2020 Principles of Macroeconomics (3)
- ECON 3400 Labor Economics (3)
- BSAD 3000 Small Business Management (3)
- BSAD 3330 Business Ethics (3)
- FIN 3200 Financial Management (3)
- FIN 3400 Real Estate Principles & Practices (3)
- MKTG 3010 Marketing Concepts & Practices (3)
- MKTG 3300 Human Resource Management (3)
- SST 3563 Principles of Supervision (3)
- SST 3702 Developing Team Leadership Skills (2)
- Advisor Approved Elective (3)
Students designing a minor in Business Administration should
receive approval of their program by the Business Administration Department
Chair.
Support Courses Required (19 credit hours)
- COMM HU1020 Principals of Public Speaking (3)
or COMM HU2110 Interpersonal & Small Group Communication (3)
- BTNY LS1403 Environment Appreciation (3)
- PHYS PS/SI2010 College Physics I (5)
- MATH QL1080 Pre-calculus (5)
- GEO PS1060 Environmental Geosciences (3)
Course Requirements
for CMT BS Major with Business Administration Minor for Non-Business Majors
Note: The Business Administration Minor requires an additional
9-10 hours of Business/ Management courses with BS CMT degree. Be sure to
consult with an advisor. Students pursuing a business administration minor
must receive approval of the program by the Business Administration Department Chair.
Check the college catalog for specific requirements.
Additional
courses required to satisfy
business minor requirements with CMT BS degree
- ECON 2020
Principles of Macroeconomics (3)
(satisfied with CMT Business Elective)
- QUAN SI2600
Business Statistics I (3)
- QUAN SI3610
Business Statistics II (3)
- Business Electives - Business/Management/Finance/Marketing Electives (6)
Check the college catalog under BSAD
for possible selections.
Suggested Course Sequence
The following suggested course sequence is provided to assist students in planning
their schedules. Use this only as a guideline and be sure to consult with an advisor.
Freshman Fall
|
Freshman Spring
|
| CMT 1100 |
1 |
CMT 1500 |
3 |
| CMT 1210 |
3 |
CMT 1310 |
3 |
| ENGL EN1010 |
3 |
CMT 2330 |
3 |
| TBE TE1700 |
3 |
ENGL EN2010 |
3 |
| LIBS TD1704 |
1 |
ACTG 2010 |
3 |
| MATH QL1080 |
5 |
|
|
| Total Hours |
16 |
Total Hours |
15 |
| |
Sophomore Fall
|
Sophomore Spring
|
| CMT 1150 |
3 |
CMT 2340 |
2 |
| CMT 2360 |
2 |
CMT 2220 |
3 |
| COMM HU1020 or HU2110 |
3 |
CMT 2640 |
2 |
| GEO PS1060 |
3 |
CMT 2880 |
3 |
| BSAD 3200 |
3 |
PHYS PS/SI2010 |
5 |
| ECON SS2010 |
3 |
|
|
| Total Hours |
17 |
Total Hours |
15 |
| |
Junior Fall
|
Junior Spring
|
| CMT 3115 |
3 |
CMT 3130 |
3 |
| CMT 3210 |
3 |
CMT 3550 |
4 |
| CMT 3260 |
4 |
Approved Business Elective |
3 |
| MGMT 3010 |
3 |
BTNY LS1403 |
3 |
| Gen Ed (HU/CA) |
3 |
Gen Ed (CA/DV) |
3 |
| Total Hours |
16 |
Total Hours |
16 |
| |
Senior Fall
|
Senior Spring
|
| CMT 4120 |
3 |
CMT 4550 |
2 |
| CMT 4150 |
3 |
CMT 4620 |
2 |
| CMT 4610 |
2 |
CMT 4890 |
2 |
| CMT 4350 |
3 |
Gen Ed (LS/PS) |
3 |
| Approved Business Elective |
3 |
Gen Ed (American Institutions) |
3 |
| Gen Ed (SS/DV) |
3 |
Approved Business Elective |
3 |
| Total Hours |
16 |
Total Hours |
15 |
|
Total Hours
|
126 |
Note: 800 hours of Work Experience is also
required.
Weber State University 2008-2009 Catalog