Construction Management Technology
ASSOCIATE OF APPLIED SCIENCE DEGREE (AAS)
- » Grade Requirements: A grade of "C" or better in all CMT
Program required
courses (a grade of "C-" is not acceptable) in addition to an overall GPA for
all courses of 2.00 or higher.
-
- » Credit Hour Requirements: 63 total credit hours are required as
listed below. A minimum of 20 hours in residence at WSU is required.
A student must also complete a minimum of 18 hours of CMT major courses at WSU
to obtain an AAS degree.
-
- » Assessment Requirements: Students will be required to
complete certain assessment instruments as part of the overall requirements for
receiving their associate's degree. Please see your advisor or your
department for specific information regarding assessment.
Advisement
All Construction Management Technology students are encouraged to meet with a faculty
advisor at the beginning of their freshman year for course and program advisement. Call the CMT
program secretary
at 801-626-7761 to schedule an appointment. (Also refer to the Department Advisor
Referral List.)
Admission Requirements
Declare your program of study. There are no
special admission or application requirements for this program.
General Education
Refer to General Requirements for
Associate of Applied Science requirements. The following courses required for
the Construction Management Technology AAS degree will also fulfill general
education requirements: COMM HU2110 (Humanities),
ECON SS2010 (Social Science) and MATH QL1080 (Quantitative Literacy). Computer and Information Literacy
as defined in this catalog is also required for the AAS degree.
Course Requirements for AAS Degree
Construction Management Technology Courses Required (28 credit hours)
- CMT 1100 Construction Management Orientation (1)
- CMT 1150 Construction Graphics (3)
- CMT 1210 Residential Construction Materials & Methods (3)
- CMT 1310 Commercial Construction Materials & Methods (3)
- CMT 1500 Computer Applications in Construction (3)
- CMT 2220 Construction Contracts & Specs (3)
- CMT SI2330 Concrete Technology (3)
- CMT 2340 Construction Surveying (2)
- CMT 2360 Building Codes & Inspection (2)
- CMT 2640 Architectural Estimating (2)
- CMT 2880 Internship (3)
or DGET 1340 for students pursuing a Construction Management Technology--Facilities Management Emphasis BS degree
Business & Management Courses Required (9 credit hours)
- ACTG 2010 Survey of Accounting I (3)
- ECON SS2010 Principles of Microeconomics (3)
- BSAD 3200 Legal Environment of Business (3)
Support Courses Required (20 credit hours)
- COMM HU2110 Interpersonal & Small Group Communication (3)
- MATH QL1080 Pre-calculus (5)
- TBE TE1700 Microcomputer Applications (3)
- LIBS TD1704 Information Navigator (1)
- PHYS PS/SI2010 College Physics I (5)
- GEO PS1060 Environmental Geosciences (3)
Suggested Course Sequence
The following suggested course sequence is provided to assist students in planning
their schedules. Use this only as a guideline and be sure to consult with an advisor.
Freshman Fall
|
Freshman Spring
|
| CMT 1100 |
1 |
CMT 1500 |
3 |
| CMT 1210 |
3 |
CMT 1310 |
3 |
| ENGL EN1010 |
3 |
CMT 2340 |
2 |
| TBE TE1700 |
3 |
PHYS PS/SI2010 |
5 |
| LIBS TD1704 |
1 |
ACTG 2010 |
3 |
| MATH QL1080 |
5 |
|
|
| Total Hours |
16 |
Total Hours |
16 |
| |
Sophomore Fall
|
Sophomore Spring
|
| CMT 1150 |
3 |
CMT SI2330 |
3 |
| CMT 2360 |
2 |
CMT 2220 |
3 |
| COMM HU2110 |
3 |
CMT 2640 |
2 |
| GEO PS1060 |
3 |
CMT 2880* |
3 |
| ECON SS2010 |
3 |
BSAD 3200 |
3 |
| |
|
ENGL EN2010 |
3 |
| Total Hours |
14 |
Total Hours |
17 |
*Students pursuing a Construction Management Technology--Facilities Management Emphasis BS degree should take DGET 1340 Architectural
Drafting for Interior Design in lieu of CMT 2880 Internship.
Weber State University 2009-2010 Catalog